Lofoten Floor Mounted Heater
The Lofoten Floor Mounted Heater is ideal for medium size vessels. Similar to the Antarctic in performance but with a larger top area, rectangular shape, and a cast-iron lid providing a top cooking surface.
- Requires 4” (10,16 cm) diameter chimney parts.
- Minimum 1,8 meter of chimney is required, a straight run with no elbows work best.
- Chimneys 1,8 meter or longer we highly recommend a barometric damper.
- Permanent fresh air vent needed in area of the unit.
- Creates a dry heat to dry out moisture inside the vessel.
- Includes a small cast iron cook top for cooking etc
- This model has a larger combustion chamber so it produces more heat than the Alaska and Newport heaters
- In sailboat installations, this unit must face fore or aft, if facing port or starboard is desired, the valve would need to be mounted to the side of the unit so the gravity fed valve won’t starve the burner on heels up to 15 degrees.
- 12v draft assist fan included (can be converted to 24v and 32v). Used for
start up and draft assistance on high fire.
- Valve is calibrated for diesel but can be re-calibrated for kerosene or
- 1 turn hot water coil for 19 – 38 liter or a 2 turn hot water coil for 57 – 76
liter can be installed for water heating
Width: 27,3 cm
Height: 45,7 cm
Depth: 43,2 cm
Weight: 14 kg
Fuel Consumption / 24hr:
4,9 ltr LOW
12,1 ltr HIGH
Low: 1,9 kWh
High: 4,8 kWh
Lofoten heater Model #: 00-LOF
Lofoten heater with a 1 turn coil Model #: 00-LOF-12-1T
Lofoten heater with a 2 turn coil Model #: 00-LOF-12-2T